Nos dernières publications

Nos dernières publications

Servin, I., Teolis, A., Bazin, A., Durin, P., Sysova, O., Gablin, C., Saudet, B., Léonard, D., Soppera, O., Leclercq, J.-L., Chevolot, Y., Chevolot, Y., Tiron, R., Delair, T. and Trombotto, S. (2023). Water-soluble bio-sourced resists for DUV lithography in a 200/300 mm pilot line environment. Micro and nano engineering, 19, pp.100202–100202. doi:https://doi.org/10.1016/j.mne.2023.100202.

Rémy, L., Sudre, G., Charlot, A. and Fleury, E. (2023). α-Substituted ketones as reagent for Passerini modification of carboxymethyl cellulose: Toward dually functionalized derivatives and thermo-sensitive chemical hydrogels. Carbohydrate Polymers, 320, pp.121228–121228. doi:https://doi.org/10.1016/j.carbpol.2023.121228.

Guerdener, B., Ayzac, V., Norsic, S., Besognet, P., Bounor-Legaré, V., Monteil, V., Dufaud, V., Raynaud, J. and Chalamet, Y. (2023). Carbonatation of [ethylene - glycidyl methacrylate]-based copolymers with carbon dioxide as reagent: from batch to solvent-free reactive extrusion. Green Chemistry, 25(16), pp.6355–6364. doi:https://doi.org/10.1039/d3gc01127e.

Biswas, S., Arief, I. and Bhattacharjee, Y. (2023). Tuning Electromagnetic Interference Shielding Performance through Controlled Alignment of Ni Nanowires in Soft PDMS Composites. ACS applied nano materials, 6(15), pp.14245–14254. doi:https://doi.org/10.1021/acsanm.3c02124.

Lian, W., Zhang, M., Wang, J., Wu, C., Lamnawar, K., Maazouz, A., Lu, B., Dong, B. and Liu, C. (2023). Interface-Engineered Composite Nanofibers for Boosting Piezoelectric Outputs of Polymeric Nanogenerators. Materials Letters, 349, pp.134860–134860. doi:https://doi.org/10.1016/j.matlet.2023.134860.

Cavallo, V., Pruvost, S., Gerard, J.-F. and Fina, A. (2023). Dispersion of Cellulose Nanofibers in Methacrylate-Based Nanocomposites. Polymers, 15(15), pp.3226–3226. doi:https://doi.org/10.3390/polym15153226.

Tavernier, R., Semsarilar, M. and Caillol, S. (2023). Bio-sourced alternatives to diglycidyl ether of bisphenol A in epoxy–amine thermosets. Green Materials, pp.1–47. doi:https://doi.org/10.1680/jgrma.23.00027.

Caussé, N., Bonin, P., Thierry, D., Le Bozec, N., Roggero, A. and Pébère, N. (2023). Ageing processes of coil-coated materials : Temperature-controlled electrochemical impedance analysis. Progress in Organic Coatings, 183, pp.107682–107682. doi:https://doi.org/10.1016/j.porgcoat.2023.107682.

Barlemont, S., Burg, A., Serghei, A., Capsal, J.-F. and Fumagalli, M. (2023). Macroscopic tensile piezoelectricity characterization of β-chitin in tubeworm tissues. Cellulose, 30(13), pp.8451–8458. doi:https://doi.org/10.1007/s10570-023-05360-z.

Kallungal, J., Chazeau, L., Chenal, J.-M., Adrien, J., Maire, E., Barrès, C., Cantaloube, B. and Heuillet, P. (2023). Quantitative analysis of carbon black agglomerates morphology in elastomer composites based on x-ray tomography by means of numerical clustering. Rubber Chemistry and Technology, 96(1), pp.90–113. doi:https://doi.org/10.5254/rct.22.77979.

Eliane Espuche (2023). Nanocomposites for gas barrier applications: Governing factors, single and coupled effects, new routes to optimise the function properties. Polymer Testing, 125, pp.108124–108124. doi : https://doi.org/10.1016/j.polymertesting.2023.108124.

Guichard, B., Ledieu, B., Cassagnau, P. and Espuche, E. (2023b). Impact of toluene sorption on oligomers and antioxydants migration from HDPE pipes. Polymer Testing, 124, pp.108052–108052. doi:https://doi.org/10.1016/j.polymertesting.2023.108052.

Casteleiro, B., Da Cruz-Boisson, F., Alcouffe, P., N Pinto, S., Martinho, G., Charreyre, M.-T., Paulo, J. and Favier, A. (2023b). Near-Infrared-Luminescent Gold Nanoclusters Stabilized by End-Grafted Biocompatible Polymer Chains for Bioimaging. ACS applied nano materials, 6(13), pp.11689–11698. doi:https://doi.org/10.1021/acsanm.3c01665.

Medfai, W., Oueslati, I., Dumas, E., Harzalli, Z., Viton, C., Mhamdi, R. (2023). Physicochemical and Biological Characterization of Encapsulated Olive Leaf Extracts for Food Preservation. Antibiotics. https://doi.org/10.3390/antibiotics12060987

Vargas, P., Merlini, C., Livi, S,. De Nardi Martins, J,. G. Soares, B,. M. O. Barra,G. (2023). The influence of carbon nanotubes and exfoliated graphite nanoplatelets modified by phosphonium-based ionic liquids on polyurethane composites. Applied Polymer Science. https://doi.org/10.1002/app.54289

Chaussoy, N., Brandt, D. and Gérard, J.-F. (2023). Formaldehyde-Free and Phenol-Free Non-toxic Phenolic Resins with High Thermostability. ACS Applied Polymer Materials. doi.org/10.1021/acsapm.3c00935.

Shi, T., Livi, S., Duchet-Rumeau, J. and Gérard, J.-F. (2023). Microencapsulated Diepoxy-Functionalized Ionic Liquids to the Design of Self-Healable Epoxy Networks. ACS Applied Polymer Materials. doi.org/10.1021/acsapm.3c00560.

Andretto, V., Taurino, G., Guerriero, G., Guérin, H., Lainé, E., Bianchi, M.G., Agusti, G., Briançon, S., Bussolati, O., Clayer-Montembault, A. and Lollo, G. (2023). Nanoemulsions Embedded in Alginate Beads as Bioadhesive Nanocomposites for Intestinal Delivery of the Anti-Inflammatory Drug Tofacitinib. Biomacromolecules, 24(6), pp.2892–2907. doi.org/10.1021/acs.biomac.3c00260.

Espy, G., Duchet-Rumeau, J., Livi, S., Lhost, O. and Gérard, J.-F. (2023). What if designing superhydrophobic polymer surfaces turned out to be very simple? Surfaces and Interfaces, pp.103072–103072. doi.org/10.1016/j.surfin.2023.103072.

Carmeli, E., Fenni, S.E., Dziza, K., Gebauer, K., Gahleitner, M. and Cavallo, D. (2023). A method for studying nucleating additives in high-density polyethylene via crystallization of micro-droplets in immiscible blends. Polymer, 279, pp.126017–126017. doi.org/10.1016/j.polymer.2023.126017.

Njakou Djomo, S., Staritsky, I., Elbersen, B., Annevelink, E. and Gabrielle, B. (2023). Supply costs, energy use, and GHG emissions of biomass from marginal lands in Brittany, France. Renewable and Sustainable Energy Reviews, 181, p.113244. doi.org/10.1016/j.rser.2023.113244.

Sysova, O., Durin, P., Gablin, C., Léonard, D., Téolis, A., Trombotto, S., Delair, T., Berling, D., Servin, I., Tiron, R., Bazin, A., Leclercq, J., Chevolot, Y. and Soppera, O. (2023). Green deep‐UV photoresist based on chitosan for microelectronics. Applied Polymer Science. doi.org/10.1002/app.54244.

Jaouadi, N., Al-Itry, R., Maazouz, A. and Lamnawar, K. (2023). Biaxial Orientation of PLA/PBAT/Thermoplastic Cereal Flour Sheets: Structure–Processing–Property Relationships. Polymers, 15(9), pp.2068–2068. doi.org/10.3390/polym15092068.

Bouchut, A., Cathala, B., Moreau, C., Lecourt, M., Petit-Conil, M., Asja Pettignano, Bernard, J., Charlot, A. and Fleury, E. (2023). Cellulosic surfaces endowed with chemical reactivity by physical adsorption of functionalized polysaccharides. Cellulose. doi.org/10.1007/s10570-023-05283-9.

Mamunya, Y., Maruzhenko, O., Kolisnyk, R., Iurzhenko, M., Pylypenko, A., Masiuchok, O., Godzierz, M., Krivtsun, I., Trzebicka, B. and Pruvost, S. (2023). Pyroresistive Properties of Composites Based on HDPE and Carbon Fillers. Polymers, 15(9), p.2105. doi.org/10.3390/polym15092105.

Attar, L., Cherif, E., Leduc, D., Valentin Predoi, M. and Galy, J. (2023). Detection of kissing bond type defects and evaluation of the bonding quality in metal/adhesive/composite structures by a wavenumber-frequency insensitive SH mode. NDT & E International, 137, p.102841. doi.org/10.1016/j.ndteint.2023.102841.

Baumgarten, N., Mumtaz, M., Hermida Merino, D., Rebollar, E., Halila, S., Bernard, J., Drockenmuller, E., Fleury, G. and Borsali, R. (2023). Interface Manipulations Using Cross-Linked Underlayers and Surface-Active Diblock Copolymers to Extend Morphological Diversity in High-χ Diblock Copolymer Thin Films. ACS Applied Materials & Interfaces, 15(19), pp.23736–23748. doi.org/10.1021/acsami.3c02247.

Merlini, C., Oliveira Castro, V., Perli, G., El Omari, Y. and Livi, S. (2023). Epoxidized Ionic Liquids as Processing Auxiliaries of Poly(Lactic Acid) Matrix: Influence on the Manufacture, Structural and Physical Properties. Nanomaterials, 13(9), pp.1476–1476. doi.org/10.3390/nano13091476.

Chaussoy, N., Brandt, D. and Gérard, J.-F. (2023). Phthalonitrile Functionalized Resoles – Use of 2,3-Dicyanohydroquinone as a Versatile Monomer for Resins with Very High Thermal Stability. Polymer Degradation and Stability, 214(110420). doi.org/10.1016/j.polymdegradstab.2023.110420.

Panagiotakis, S., Mavroidi, B., Athanasopoulos, A., Ricardo Gonçalves, A., Bugnicourt-Moreira, L., Regagnon, T., Boukos, N., Charalambidis, G., Coutsolelos, A.G., Grigalavicius, M., Theodossiou, T.A., Berg, K., Ladavière, C., Pelecanou, M. and Yannakopoulou, K. (2023). Small anticancer drug release by light: Photochemical internalization of porphyrin-β-cyclodextrin nanoparticles. Carbohydr Polym, 306(120579), p.306. doi.org/10.1016/j.carbpol.2023.120579.

Chabbah, T., Chatti, S., Jaffrezic-Renault, N., Weidner, S., Marestin, C. and Mercier, R. (2023). Impedimetric sensors based on diethylphosphonate‐containing poly(arylene ether nitrile)s films for the detection of lead ions. Polymers advanced technologies, 34(8), pp.2471–2481. doi.org/10.1002/pat.6065.

Lacotte, V., Rey, M., Peignier, S., Mercier, P.-E., Rahioui, I., Sivignon, C., Razy, L., Benhamou, S., Livi, S. and Da Silva, P. (2023). Bioactivity and chemical composition of forty plant essential oils against the pea aphid Acyrthosiphon pisum revealed peppermint oil as a promising biorepellent. Industrial Crops and Products, 197(116610). doi.org/10.1016/j.indcrop.2023.116610.

Lacambra-Andreu, X., Maazouz, A., Lamnawar, K. and Chenal, J.-M. (2023). A Review on Manufacturing Processes of Biocomposites Based on Poly(α-Esters) and Bioactive Glass Fillers for Bone Regeneration. Biomimetics, 8(1), pp.81–81. doi.org/10.3390/biomimetics8010081.

Saxer, S., Marestin, C. and Mercier, R. (2022). Synthesis of poly(pyrazolopyridine)s by Hantzsch multicomponent polymerization. Polymer, 252, p.124935. doi.org/10.1016/j.polymer.2022.124935.

Femina, G., de Ballesteros, O.R., Urciuoli, G., van Duin, M., Gögelein, C., Tammaro, D., Sotta, P. and Auriemma, F. (2023). X-ray diffraction study of strain-induced crystallization of hydrogenated nitrile-butadiene rubbers: Effect of crosslink density. Polymer, 271, p.125782. doi:https://doi.org/10.1016/j.polymer.2023.125782.

Fauvre, L., Fleury, E., Ganachaud, F. and Portinha, D. (2023). Extra-Soft Self-Healable Supramolecular Silicone Elastomers from Bis-Amide-PDMS Multiblock Copolymers Prepared by Aza-Michael Reaction. ACS Applied Polymer Materials, 5(2), pp.1229–1240. doi:https://doi.org/10.1021/acsapm.2c01746.

Rosenfeld, J., Ganachaud, F. and Lee, D. (2023). Modulation of Oil/Polymer Nanocapsule Size via Phase Diagram-Guided Microfluidic Coprecipitation. Langmuir, 39(15), pp.5477–5485. doi:https://doi.org/10.1021/acs.langmuir.3c00183.

Keskes, M., Desse, M., Carrot, C. and Jaziri, M. (2023). Interaction between thermoplastic starch and cellulose in poly (butylene adipate-co-terephthalate) composites with cellulosic fillers. Journal of Thermoplastic Composite Materials, p.089270572311628. doi:https://doi.org/10.1177/08927057231162833.

Eriksson, V., Mistral, J., Yang Nilsson, T., Andersson Trojer, M. and Evenäs, L. (2023). Microcapsule functionalization enables rate-determining release from cellulose nonwovens for long-term performance. Journal of Materials Chemistry B, 11(12), pp.2693–2699. doi:https://doi.org/10.1039/d2tb02485c.

Nicolas, M., Serghei, A., Lucas, C., Beyou, E. and Fumagalli, M. (2023). Grafting of polyamines onto periodate oxidized nanocellulose, and its application to the fabrication of ionic nanopapers. Polymer, 270, p.125760. doi:https://doi.org/10.1016/j.polymer.2023.125760.

Garreau, C., Chiappisi, L., Micciulla, S., Morfin, I., Trombotto, S., Delair, T. and Sudre, G. (2023). Preparation of highly stable and ultrasmooth chemically grafted thin films of chitosan. Soft Matter, 19(8), pp.1606–1616. doi:https://doi.org/10.1039/d3sm00003f.

Besançon, M., Wang, Y., Mutin, H., Alauzun, J.G., Robin, J.-J., Espuche, E. and Bounor-Legaré, V. (2023). In situ synthesis of titanium phosphonate by a non-hydrolytic sol-gel route within a viscous polymer medium. Journal of Sol-Gel Science and Technology. doi:https://doi.org/10.1007/s10971-022-06032-3.

Goument, C., Gerges, T., Lombard, P., Lakhdar, H., Arli, M., Gilmus, V.M., Lambert, S.A., Allard, B., Charmeau, J.-Y. and Cabrera, M. (2023). In-Mold Electronics on Poly(Lactic Acid): towards a more sustainable mass production of plastronic devices. The International Journal of Advanced Manufacturing Technology, 125(5-6), pp.2643–2660. doi:https://doi.org/10.1007/s00170-023-10878-4.

El Omari, Y., Yousfi, M., Duchet-Rumeau, J. and Maazouz, A. (2023). Interfacial rheology for probing the in-situ chemical reaction at interfaces of molten polymer systems. Materials Today Communications, 35, p.105640. doi:https://doi.org/10.1016/j.mtcomm.2023.105640.

Howard, J.A., Kuznietsova, H., Dziubenko, N., Aigle, A., Natuzzi, M., Thomas, E., Lysenko, V., David, L., Brichart, T., Lux, F. and Tillement, O. (2023). Combating lead and cadmium exposure with an orally administered chitosan-based chelating polymer. Scientific Reports, 13(1). doi:https://doi.org/10.1038/s41598-023-28968-4.

Jovet, C., Fraison, E., Lornage, J., Journel, N.M., Gavoille, A., David, L., Montembault, A., Fournier, C., Salle, B. and Labrune, E. (2023). A New Bioreactor to Promote Human Follicular Growth with or without Activin A in Transgender Men. Reproductive Medicine, 4(1), 14–27. doi:https://doi.org/10.3390/reprodmed4010003.

Schimpf, U., Caldas-Silveira, E., Katchan, L., Vigier-Carriere, C., Lantier, I., Nachmann, G., Gidlöf, S., Jonasson, A.F., Björndahl, L., Trombotto, S., Druart, X. and Crouzier, T. (2022). Topical reinforcement of the cervical mucus barrier to sperm. Science Translational Medicine, 14(673). doi:https://doi.org/10.1126/scitranslmed.abm2417.

Qiao, H., Zheng, B., Zhong, G., Li, Z., Cardinaels, R., Moldenaers, P., Lamnawar, K., Maazouz, A., Liu, C. and Zhang, H. (2023). Understanding the Rheology of Polymer–Polymer Interfaces Covered with Janus Nanoparticles: Polymer Blends versus Particle Sandwiched Multilayers. Macromolecules, 56(2), 647–663. doi:10.1021/acs.macromol.2c01973.

Eghbal, N., Viton, C. and Gharsallaoui, A. (2022). Nano and microencapsulation of bacteriocins for food applications: A review. Food Bioscience, 50, 102173. doi:10.1016/j.fbio.2022.102173.

Lacambra-Andreu, X., Morelle, X.P., Maazouz, A., Chenal, J.-M. and Lamnawar, K. (2022). Rheological investigation and modeling of healing properties during extrusion-based 3D printing of poly(lactic-acid). Rheologica Acta, 62(1), 31–44. doi:10.1007/s00397-022-01377-6.

Hou, L., Livi, S., Gérard, J.-F. and Duchet-Rumeau, J. (2023). LIonomers-New Generation of Ionomer: Understanding of Their Interaction and Structuration as a Function of the Tunability of Cation and Anion. Polymers, 15(2), 370. doi:10.3390/polym15020370.

Qiao, H., Maazouz, A., Lamnawar, K. (2022). Study of Morphology, Rheology, and Dynamic Properties toward Unveiling the Partial Miscibility in Poly(lactic acid)—Poly(hydroxybutyrate-co-hydroxyvalerate) Blends. Polymers, 14(24), 5359. doi:10.3390/polym14245359.

Demir, B., Chan, K.-Y., Livi, S. (2022). Rational Design of Solid Polymer Electrolyte Based on Ionic Liquid Monomer for Supercapacitor Applications via Molecular Dynamics Study. Polymers, 14(23), 5106. doi:10.3390/polym14235106.

Yousfi, M., Samuel, C., Dadouche, T., Mincheva, R., Lacrampe, M.-F. (2023). Long-chain branched poly(butylene succinate-co-terephthalate) copolyesters: Impact of (reactive) synthesis strategies on melt strength properties. Express Polymer Letters, 17(3), 300–316. doi:10.3144/expresspolymlett.2023.22.

Sandei, B., Massardier, V., Brunel, R. (2022). Alternative building blocks sources for poly (ethylene terephthalate): A short review with socio-economical points of view. Frontiers in Materials, 9. doi:10.3389/fmats.2022.1005770.

Boumdouha, N., Duchet-Rumeau, J., Gerard, J.-F., Tria, D.E., Oukara, A. (2022). Research on the Dynamic Response Properties of Nonlethal Projectiles for Injury Risk Assessment. ACS Omega, 7(50), 47129–47147. doi:10.1021/acsomega.2c06265.

Timoumi, M., Barhoumi, N., Znaidi, A., Maazouz, A., Lamnawar, K. (2022). Mechanical behavior of 3D-printed PEEK and its application for personalized orbital implants with various infill patterns and densities. Journal of the Mechanical Behavior of Biomedical Materials, 136, 105534. doi:10.1016/j.jmbbm.2022.105534.

Rainglet, B., Besognet, P., Benoit, C., Delage, K., Bounor-Legaré, V., Forest, C., Cassagnau, P., Chalamet, Y. (2022). TPV Foaming by CO2 Extrusion: Processing and Modelling. Polymers, 14(21), 4513. doi:10.3390/polym14214513.‌

Nguyen, D., Desse, M. and Jegat, C. (2022). Oily phase migration control at the interface of hydrophobic/hydrophilic polymer blends. Polymer, 262, 125442. doi:10.1016/j.polymer.2022.125442.

Solimando, X., Babin, J., Arnal-Herault, C., Roizard, D., Barth, D., Poncot, M., Royaud, I., Alcouffe, P., David, L. and Jonquieres, A. (2022). Controlled grafting of multi-block copolymers for improving membrane properties for CO2 separation. Polymer, 255, p.125164. doi:10.1016/j.polymer.2022.125164.

Labrune, E., Fournier, C., Riche, B., David, L., Montembault, A., Collardeau-Frachon, S., Benchaib, M., Lornage, J., Iwaz, J. and Salle, B. (2022). Development and Survival of Human Ovarian Cells in Chitosan Hydrogel Micro-Bioreactor. Medicina, 58(11), p.1565. doi:10.3390/medicina58111565.

Perli, G., Wylie, L., Demir, B., Gerard, J.-F., Pádua, A.A.H., Gomes, M.C., Duchet-Rumeau, J., Baudoux, J. and Livi, S. (2022). From the Design of Novel Tri- and Tetra-Epoxidized Ionic Liquid Monomers to the End-of-Life of Multifunctional Degradable Epoxy Thermosets. ACS Sustainable Chemistry & Engineering. doi:10.1021/acssuschemeng.2c04499.

Caprin, B., Viñado-Buil, G., Sudre, G., Morelle, X.P., Da Cruz-Boisson, F., Charlot, A. and Fleury, E. (2022). κ-Carrageenan Associated with Fructose/Glycerol/Water LTTM: Toward Natural Thermosensitive Physical Gels. ACS Sustainable Chemistry & Engineering, 10(45), pp.14817–14825. doi:10.1021/acssuschemeng.2c04437.

Cao, Y., Wang, X., Wu, J., Xu, Y., Gerard, J.-F., Jiang, L., Zeng, B. and Dai, L. (2022). A novel self-healing and removable hexagonal boron nitride/epoxy coating with excellent anti-corrosive property based on Diels-Alder reaction. Progress in Organic Coatings, 173, p.107209. doi:10.1016/j.porgcoat.2022.107209.

Keskes, M., Desse, M., Jaziri, M. and Carrot, C. (2022). The effect of periodate oxidation, tert-butanol treatment, and starch addition in improving melt dispersion of cellulosic fillers in PBAT. Journal of Thermoplastic Composite Materials, p.089270572211299. doi:10.1177/08927057221129997.

Odet, F., Ylla, N., Delage, K. and Cassagnau, P. (2022). Influence of Chain Extenders on Recycled Standard and Opaque PET Rheology and Melt-Spun Filament Properties. ACS Applied Polymer Materials. doi:10.1021/acsapm.2c01231.

Saloumi, N., Daki, I., El Bouchti, M., Oumam, M., Manoun, B., Yousfi, M., Hannache, H. and Cherkaoui, O. (2022). Development and Characterization of Phosphate Glass Fibers and Their Application in the Reinforcement of Polyester Matrix Composites. Materials, 15(21), p.7601. doi:10.3390/ma15217601.

Maulet, T., Gimenez, J., Demé, F., Alcouffe, P., Vera, R., Barrès, C. and Fulchiron, R. (2022). Effect of self-nucleation on the crystallization kinetics and the microstructure of polypropylene parts manufactured by Laser Powder Bed Fusion. Additive Manufacturing, 59, p.103153. doi:10.1016/j.addma.2022.103153.

Abla, M., Waked, A., Trombotto, S. and Maalouf, M. (2022). Synthesis and Evaluation of Anticancer Activity of Hyaluronic Acid/Vanillin Conjugates. Macromolecular Chemistry and Physics, 223(21), p.2200190. doi:10.1002/macp.202200190.

Atawa, B., Maneval, L., Alcouffe, P., Sudre, G., David, L., Sintes-Zydowicz, N., Beyou, E. and Serghei, A. (2022). In-situ coupled mechanical/electrical investigations on conductive TPU/CB composites: Impact of thermo-mechanically induced structural reorganizations of soft and hard TPU domains on the coupled electro-mechanical properties. Polymer, 256, p.125147. doi:10.1016/j.polymer.2022.125147.

Tamo, A.K., Tran, T.A., Doench, I., Jahangir, S., Lall, A., David, L., Peniche-Covas, C., Walther, A. and Osorio-Madrazo, A. (2022). 3D Printing of Cellulase-Laden Cellulose Nanofiber/Chitosan Hydrogel Composites: Towards Tissue Engineering Functional Biomaterials with Enzyme-Mediated Biodegradation. Materials, 15(17), p.6039. doi:10.3390/ma15176039.

Perli, G., Soares, M.C.P., Cabral, T.D., Bertuzzi, D.L., Bartoli, J.R., Livi, S., Duchet-Rumeau, J., Cordeiro, C.M.B., Fujiwara, E. and Ornelas, C. (2022). Synthesis of Carbon Nanodots from Sugarcane Syrup, and Their Incorporation into a Hydrogel-Based Composite to Fabricate Innovative Fluorescent Microstructured Polymer Optical Fibers. Gels, 8(9), p.553. doi:10.3390/gels8090553.

Genedy, H.H., Delair, T. and Montembault, A. (2022). Chitosan Based MicroRNA Nanocarriers. Pharmaceuticals, 15(9), p.1036. doi:10.3390/ph15091036.

Zid, S., Alcouffe, P., Zinet, M. and Espuche, E. (2022). Mixed-Matrix Membranes Based on Polyetherimide, Metal–Organic Framework and Ionic Liquid: Influence of the Composition and Morphology on Gas Transport Properties. Polymers, 14(17), p.3489. doi:10.3390/polym14173489.

Solimando, X., Babin, J., Arnal-Herault, C., Roizard, D., Barth, D., Poncot, M., Royaud, I., Alcouffe, P., David, L. and Jonquieres, A. (2022). Controlled grafting of multi-block copolymers for improving membrane properties for CO2 separation. Polymer, 255, p.125164. doi:10.1016/j.polymer.2022.125164.

Labrune, E., Fournier, C., Riche, B., David, L., Montembault, A., Collardeau-Frachon, S., Benchaib, M., Lornage, J., Iwaz, J. and Salle, B. (2022). Development and Survival of Human Ovarian Cells in Chitosan Hydrogel Micro-Bioreactor. Medicina, 58(11), p.1565. doi:10.3390/medicina58111565.

Perli, G., Wylie, L., Demir, B., Gerard, J.-F., Pádua, A.A.H., Gomes, M.C., Duchet-Rumeau, J., Baudoux, J. and Livi, S. (2022). From the Design of Novel Tri- and Tetra-Epoxidized Ionic Liquid Monomers to the End-of-Life of Multifunctional Degradable Epoxy Thermosets. ACS Sustainable Chemistry & Engineering. doi:10.1021/acssuschemeng.2c04499.

Caprin, B., Viñado-Buil, G., Sudre, G., Morelle, X.P., Da Cruz-Boisson, F., Charlot, A. and Fleury, E. (2022).
κ-Carrageenan Associated with Fructose/Glycerol/Water LTTM: Toward Natural Thermosensitive Physical Gels. ACS Sustainable Chemistry & Engineering, 10(45), pp.14817–14825. doi:10.1021/acssuschemeng.2c04437.

Cao, Y., Wang, X., Wu, J., Xu, Y., Gerard, J.-F., Jiang, L., Zeng, B. and Dai, L. (2022). A novel self-healing and removable hexagonal boron nitride/epoxy coating with excellent anti-corrosive property based on Diels-Alder reaction. Progress in Organic Coatings, 173, p.107209. doi:10.1016/j.porgcoat.2022.107209.

Keskes, M., Desse, M., Jaziri, M. and Carrot, C. (2022). The effect of periodate oxidation, tert-butanol treatment, and starch addition in improving melt dispersion of cellulosic fillers in PBAT. Journal of Thermoplastic Composite Materials, p.089270572211299. doi:10.1177/08927057221129997.

Odet, F., Ylla, N., Delage, K. and Cassagnau, P. (2022). Influence of Chain Extenders on Recycled Standard and Opaque PET Rheology and Melt-Spun Filament Properties. ACS Applied Polymer Materials. doi:10.1021/acsapm.2c01231.

Saloumi, N., Daki, I., El Bouchti, M., Oumam, M., Manoun, B., Yousfi, M., Hannache, H. and Cherkaoui, O. (2022).
Development and Characterization of Phosphate Glass Fibers and Their Application in the Reinforcement of Polyester Matrix Composites. Materials, 15(21), p.7601. doi:10.3390/ma15217601.

Maulet, T., Gimenez, J., Demé, F., Alcouffe, P., Vera, R., Barrès, C. and Fulchiron, R. (2022). Effect of self-nucleation on the crystallization kinetics and the microstructure of polypropylene parts manufactured by Laser Powder Bed Fusion. Additive Manufacturing, 59, p.103153. doi:10.1016/j.addma.2022.103153.

Abla, M., Waked, A., Trombotto, S. and Maalouf, M. (2022). Synthesis and Evaluation of Anticancer Activity of Hyaluronic Acid/Vanillin Conjugates. Macromolecular Chemistry and Physics, 223(21), p.2200190. doi:10.1002/macp.202200190.

Atawa, B., Maneval, L., Alcouffe, P., Sudre, G., David, L., Sintes-Zydowicz, N., Beyou, E. and Serghei, A. (2022).
In-situ coupled mechanical/electrical investigations on conductive TPU/CB composites: Impact of thermo-mechanically induced structural reorganizations of soft and hard TPU domains on the coupled electro-mechanical properties. Polymer, 256, p.125147. doi:10.1016/j.polymer.2022.125147.

Tamo, A.K., Tran, T.A., Doench, I., Jahangir, S., Lall, A., David, L., Peniche-Covas, C., Walther, A. and Osorio-Madrazo, A. (2022). 3D Printing of Cellulase-Laden Cellulose Nanofiber/Chitosan Hydrogel Composites: Towards Tissue Engineering Functional Biomaterials with Enzyme-Mediated Biodegradation. Materials, 15(17), p.6039. doi:10.3390/ma15176039.

Perli, G., Soares, M.C.P., Cabral, T.D., Bertuzzi, D.L., Bartoli, J.R., Livi, S., Duchet-Rumeau, J., Cordeiro, C.M.B., Fujiwara, E. and Ornelas, C. (2022). Synthesis of Carbon Nanodots from Sugarcane Syrup, and Their Incorporation into a Hydrogel-Based Composite to Fabricate Innovative Fluorescent Microstructured Polymer Optical Fibers. Gels, 8(9), p.553. doi:10.3390/gels8090553.

Genedy, H.H., Delair, T. and Montembault, A. (2022). Chitosan Based MicroRNA Nanocarriers. Pharmaceuticals, 15(9), p.1036. doi:10.3390/ph15091036.

Zid, S., Alcouffe, P., Zinet, M. and Espuche, E. (2022). Mixed-Matrix Membranes Based on Polyetherimide, Metal–Organic Framework and Ionic Liquid: Influence of the Composition and Morphology on Gas Transport Properties. Polymers, 14(17), p.3489. doi:10.3390/polym14173489.

Gaumond, B., Livi, S., Gérard, J.-F. and Duchet-Rumeau, J. (2022). Imidazolium Salt for Enhanced Interfacial Shear Strength in Polyphenylene Sulfide/Ex-PAN Carbon Fiber Composites. Polymers, 14(17), p.3692. doi:10.3390/polym14173692.

Tembhurnikar, N., Majesté, J., Martin, S. and Bonnefoy, O. (2022). Characterization of the incorporation of a granular medium into elastomer matrices during mixing process. Journal of Applied Polymer Science, 139(23), p.52280. doi:10.1002/app.52280.

Delamarche, E., Mattlet, A., Livi, S., Gérard, J.-F., Bayard, R. and Massardier, V. (2022). Impact of Ionic Liquids on the (bio)degradability of Poly(butylene succinate)/Poly(lactic acid) blends. Frontiers in Materials, 9. doi:10.3389/fmats.2022.975438.

Simon, M., Fulchiron, R. and Gouanvé, F. (2022). Water Sorption and Mechanical Properties of Cellulosic Derivative Fibers. Polymers, 14(14), p.2836. doi:10.3390/polym14142836.

Cosquer, R., Pruvost, S. and Gouanvé, F. (2022). Effect of Temperature and Humidity on the Water and Dioxygen Transport Properties of Polybutylene Succinate/Graphene Nanoplatelets Nanocomposite Films. Membranes, 12(7), p.721. doi:10.3390/membranes12070721.

Perli, G., Demir, B., Pruvost, S., Duchet-Rumeau, J., Baudoux, J. and Livi, S. (2022). From the Design of Multifunctional Degradable Epoxy Thermosets to Their End of Life. ACS Sustainable Chemistry & Engineering, 10(33), pp.11004–11015. doi:10.1021/acssuschemeng.2c03326.

Belhadj, O., Hammiche, D., Boukerrou, A., Gérard, J.-F. and Duchet, J. (2022). Effect of alfa fiber loading on the mechanical, physical and dielectric properties of epoxy-amine composite. Journal of Composite Materials, p.002199832211192. doi:10.1177/00219983221119269.

Faraj, H., Follain, N., Sollogoub, C., Almeida, G., Chappey, C., Marais, S., Tencé-Girault, S., Gouanvé, F., Espuche, E. and Domenek, S. (2022). Gas barrier properties of polylactide/cellulose nanocrystals nanocomposites. Polymer Testing, 113, p.107683. doi:10.1016/j.polymertesting.2022.107683.

Mhiri, S., Abid, M., Abid, S., Prochazka, F., Pillon, C. and Mignard, N. (2022). Green synthesis of covalent hybrid hydrogels containing PEG/PLA-based thermoreversible networks. Journal of Polymer Research, 29(8). doi:10.1007/s10965-022-03153-9.

Beutier, C., Serghei, A., Cassagnau, P., Heuillet, P., Cantaloube, B., Selles, N., Morfin, I., Sudre, G. and David, L. (2022). In situ coupled mechanical/electrical/WAXS/SAXS investigations on ethylene propylene diene monomer resin/carbon black nanocomposites. Polymer, 254, p.125077. doi:10.1016/j.polymer.2022.125077.

El Omari, Y., Yousfi, M., Duchet-Rumeau, J. and Maazouz, A. (2022a). Probing the elongational rheological behaviour at interfaces of immiscible polymer melts using dilational tensiometry: effect of viscosity and temperature on the interfacial properties. Rheologica Acta, 61(8-9), pp.613–636. doi:10.1007/s00397-022-01364-x.

El Omari, Y., Yousfi, M., Duchet-Rumeau, J. and Maazouz, A. (2022). Recent Advances in the Interfacial Shear and Dilational Rheology of Polymer Systems: From Fundamentals to Applications. Polymers, 14(14), p.2844. doi:10.3390/polym14142844.

Samet, M., Kallel, A. and Serghei, A. (2022). Maxwell-Wagner-Sillars interfacial polarization in dielectric spectra of composite materials: Scaling laws and applications. Journal of Composite Materials, 56(20), pp.3197–3217. doi:10.1177/00219983221090629.

Cabrera, G., Li, J., Maazouz, A. and Lamnawar, K. (2022). A Journey from Processing to Recycling of Multilayer Waste Films: A Review of Main Challenges and Prospects. Polymers, 14(12), p.2319. doi:10.3390/polym14122319.

Mahato, P., Puyoo, E., Pruvost, S. and Deleruyelle, D. (2022). Water-soluble polyethylene-oxide polymer based memristive devices. Microelectronic Engineering, 260, p.111806. Doi:10.1016/j.mee.2022.111806.

Livi, S., Baudoux, J., Gérard, J.-F. and Duchet-Rumeau, J. (2022). Ionic Liquids: A Versatile Platform for the Design of a Multifunctional Epoxy Networks 2.0 Generation. Progress in Polymer Science, 132, p.101581. doi:10.1016/j.progpolymsci.2022.101581.

Kui, T., Chardin, C., Rouden, J., Livi, S., Baudoux, J. (2022). Sulfonates as versatile structural counterions of epoxidized salts. ChemSusChem. 15, e202200198.

Findik, B., Cinquin, V., Gyppaz, F., Carrot, C., Bounor-Legaré, V. (2022). Solvent free sol-gel based synthesis of soft magnesium silicate. Journal of Sol-Gel Science and Technology. doi:10.1007/s10971-022-05852-7.

Besançon, M., Wang, Y., Alauzun, J.G., Mutin, H., Espuche, E., Bounor-Legaré, V. (2022). Tuning polymer/TiO2 nanocomposites morphology by in situ non-hydrolytic sol-gel syntheses in viscous polymer medium: influence of the polymer nature and oxygen donor. Polymers, 14, 2273.

Odet, F., Ylla, N., Fulchiron, R., Cassagnau, P. (2022). Recyclability of opaque PET from high speed melt spinning: determination of the structures and properties of filaments. Polymers, 14, 2235.

Hajj, R., Brunel, R., Sonnier, R., Longuet, C., Ganachaud, F. (2022). Silicone-recycled pyrolyzed fillers for enhanced thermal - and flame - resistant silicone elastomers. Polymer Degradation and Stability, 200, 109947.

Chen, S., Wu, Y., Lortie, F., Bernard, J., Binder, W.H., Zhu, J. (2022). Hydrogen‐bonds‐mediated nanomedicine: design, synthesis, and applications. Macromolecular Rapid Communications, 2200168. doi:10.1002/marc.202200168.

Le Hel, C., Alcouffe, P., Lucas, A., Cassagnau, P., Bounor-Legaré, V. (2022). Curing agent-dependent localization of carbon black in thermoplastic vulcanizates. Materials Chemistry and Physics, 282, 125926.

Kouki, S., Jaoued-Grayaa, N., Anene, A., Beyou, E., Chevalier, Y., Hbaieb, S. (2022). The enhanced adsorption properties of molecular imprinted polymer material prepared using nitroxide-mediated radical deactivation reversible polymerization. Polymer, 249, 124841.

Chaussoy, N., Brandt, D., Gérard, J.-F. (2022). Versatile method to reduce the free formaldehyde content in phenolic resins for high-temperature applications. ACS Applied Polymer Materials, 4, 4454–4463.

Chen, S., Li, Z., Wu, Y., Mahmood, N., Lortie, F., Bernard, J., Binder, W.H., Zhu, J. (2022). Hydrogen‐bonded supramolecular polymer adhesives: straightforward synthesis and strong substrate Interaction. Angewandte Chemie International Edition, 61, e202203876.

Fabre, L., Rousset, C., Monier, K., Da Cruz-Boisson, F., Bouvet, P., Charreyre, M.-T., Delair, T., Fleury, E., Favier, A. (2022). Fluorescent polymer-AS1411-aptamer probe for dSTORM super-resolution imaging of endogenous nucleolin. Biomacromolecules, 23, 2302–2314.

Retailleau, C., Alaa Eddine, J., Ndagijimana, F., Haddad, F., Bayard, B., Sauviac, B., Alcouffe, P., Fumagalli, M., Bounor-Legaré, V., Serghei, A. (2022). Universal behavior for electromagnetic interference shielding effectiveness of polymer based composite materials. Composites Science and Technology, 221, 109351.

Rocchi, P., Brichart-Vernos, D., Lux, F., Morfin, I., David, L., Rodriguez-Lafrasse, C., Tillement, O. (2022). A new generation of ultrasmall nanoparticles inducing sensitization to irradiation and copper depletion to overcome radioresistant and invasive cancers. Pharmaceutics, 14, 814.

Belkhir, K., Riquet, G., Becquart, F. (2022). Polymer processing under microwaves. Advances in Polymer Technology, 2022, 1–21.

‌Lecocq, H., Sudre, G., Alcouffe, P., Lhost, O., Cassagnau, P., Serghei, A. (2022). Enhanced electromagnetic interference shielding effectiveness of polypropylene/hybrid metallic fillers composite materials by coalescence-driven guided electrical percolation. Polymer, 246, 124740.

Gallu, R., Méchin, F., Gérard, J.-F.,Dalmas, F. (2022). Influence of the chain extender of a segmented polyurethane on the properties of polyurethane-modified asphalt blends. Construction and Building Materials, 328, 127061.

Ramos, R., Bernard, J., Ganachaud, F., Miserez, A. (2022). Protein‐based encapsulation strategies: Toward micro‐ and nanoscale carriers with increased functionality. Small Science, 2, 2100095.

Rainglet, B., Verron, L., Chalamet, Y., Bounor-Legaré, V., Delage, K., Forest, C., Cassagnau, P. (2022). New reactive formulations for polypropylene foams macromolecular. Macro-Molecular Reaction Engineering. DOI:10.1002/mren.202200004

Sotta, P., Albouy, P-A., Taha, M-A., Moreaux, B., Fayolle, C. (2022). Crosslinked elastomers: structure–property relationships and stress-optical law. Polymers, 14, 9

Griffiths, P., Coativy, G., Dalmas, F., Falco, G.,  Jiang, L.,  Xiang, Z., Le, M-Q., Ducharne, B., Le Roy, D., Mechin, F., Bernard, J., Meille, S., P. Baeza, G. (2022). Ultrafast remote healing of magneto-responsive thermoplastic elastomer-based nanocomposites. Macromolecules, 55, 831–843

Tembhurnikar, N., Majesté, J-C., Martin, S., Bonnefoy, O. (2022). Characterization of the incorporation of a granular medium into elastomer matrices during mixing process. Applied Polymer Science, 139, 23

Chaabane, L., V Baouab, M, H., Beyou, E. (2022). Reduced zwitterionic graphene oxide sheets decorated with nickel nanoparticles for A(3)-coupling reactions under optimized green experimental conditions. Applied Organometallic Chemistry, 36, e6625.

Tran, K., Chalamet,Y., Mignard, N., Carrot, C., Gyppaz, F., Auvray, T. (2022). Kinetics of geopolymerization followed by rheology: A general model. Soft Matter, 18, 2549-2557

Boumdouha, N., Safidine, Z.,  Boudiaf, A., Houssém, C., Duchet-Rumeau, J., Gerard, J-F (2022).  Development and characterization of tailored polyurethane foams for shock absorption. Applied Science, 12, 2206.

Boumdouha, N., Safidine, Z.,  Boudiaf, A.,  Duchet-Rumeau, J., Gerard, J-F. (2022). Experimental study of the dynamic behaviour of loaded polyurethane foam free fall investigation and evaluation of microstructure. The International Journal of Advanced Manufacturing Technology, 120, 3365–3381 

Yousfi, M., Samuel, C., Soulestin, J., Lacrampe, M-F. (2022). Rheological considerations in processing self-reinforced thermoplastic polymer nanocomposites. A Review. Polymers, 14, 637.

Chabane, H., Livi, S., Duchet-Rumeau, J., Gérard, J-F. (2022). New epoxy thermosets organic-inorganic hybrid nanomaterials derived from imidazolium ionic liquid monomers and POSS®Ph. Nanomaterials, 12, 550.

Szadkowski, B., Rogowski, J., Maniukiewicz, W., Beyou, E., Marzec, A. (2022). New natural organic-inorganic pH indicators: Synthesis and characterization of pro-ecological hybrid pigments based on anthraquinone dyes and mineral supports. Journal of Industrial and Engineering Chemistry, 105, 446-462.

Barhoumi, N., Khlifi, K., Maazouz, A., Lamnawar, K. (2022). Fluorinated ethylene propylene coatings deposited by a spray process: mechanical properties, scratch and wear behavior. Polymers, 14, 347.

Lamrayah, M., Phelip, C., Coiffier, C., Lacroix, L., Willemin, T., Trimaille, T., Verrier, B. (2022). A polylactide-based micellar adjuvant improves the intensity and quality of immune response. Pharmaceutics. 14, 107.

Reignier, J., Méchin, F., Sarbu, A. (2022). Surface curing temperature on depth-specific physical properties of poly(urethane-isocyanurate) foams. European Polymer Journal, 163, 110899.

Abla, M., Ladaviere, C., Trombotto, S. (2022). Impact of HILIC amino-based column equilibration conditions on the analysis of chitooligosaccharides. Chromatographia, 85, 55-63.

Sid, D., Baitiche, M., Arrar, L., Djerboua, F., Bourzamid, R., Alcouffe, P., Boutahala, M., Gil, A., David, L., Le Borgne, M. (2022). Improved biological performance of ketoprofen using novel modified halloysite clay nanotubes. Applied Clay Science, 216, 106341.

Charfeddine, I., Majesté, J-C., Carrot, C., Lhost, O. (2022). Surface tension and interfacial tension of polyolefins and polyolefin blends. Journal of Applied Polymer Science, 139, 51885.

Peers, S., Montembault, A., Ladavière, C. (2022). Chitosan hydrogels incorporating colloids for sustained drug delivery. Carbohydrate Polymers, 275, 118689.

Beutier, C., David, L., Sudre, G., Cassagnau, P., Heuillet, P., Cantaloube, B., Serghei, A. (2022). In-situ coupled mechanical/electrical investigations of EPDM/CB composite materials : The electrical signature of the mechanical Mullins effect. Composites Science and Technology, 218, 109144.

Von Boxberg, Y., Soares S., Giraudon, C., David, L., Viallon, M., Montembault, A., Nothias, F. (2022). Macrophage polarization in vitro and in vivo modified by contact with fragmented chitosan hydrogel. Journal of Biomedical Materials Research Part A, 110, 773-787.